Sony VAIO Digital Studio PCV-E314DS Reference Manual page 45

4
Align the module over the appropriate socket, noting the location of
pin 1 on the module and pin 1 on the socket.
1
Indicates pin 1
5
Carefully but firmly insert the edge of the module into the socket.
6
Press down firmly and evenly at both corners until the module is
fully seated.
When the module is fully seated, the handles on each side are straight up and
locked into the slot on each side of the module. If the handles are not totally
straight upright, continue to press down on each side of the module until the
handles lock into place.
7
Replace any add-in cards and other components that were removed.
8
Replace the bottom panel (see
page 28).
Removing, Installing, and Replacing Components
Memory module (DIMM)
"Replacing the Bottom Panel"
Press down
here
Handles
Pin 1 side
DIMM2
DIMM1
37
OM04586.VSD
on