Sony VAIO Digital Studio PCV-E314DS Reference Manual page 42

34
VAIO Digital Studio Reference Manual
9
If necessary, remove any add-in cards (see
Card" on page 31) to gain access to the battery. You may also need to
disconnect some cables.
!
Touch any exposed metal part of chassis to discharge static electricity in
your body before handling an add-in card or other sensitive electronic
component.
10
Insert a small flathead screwdriver into the small space at the top of
the battery holder.
11
Gently pry the battery out and dispose of it according to the
instructions that came with the new battery.
12
Insert the new battery into the battery holder, with the plus (+) side
up.
The Sony CR2032 battery is recommended. Using a type of battery other than a
CR2032 may present a risk of fire or explosion.
13
Replace any add-in cards that were removed.
14
Reconnect any cables that were disconnected.
15
Replace the bottom panel (see
page 28).
16
Replace the left side panel (see
page 29).
17
Reconnect the power cord and turn on the computer.
"Removing an Add-in
"Replacing the Bottom Panel"
"Replacing the Left Side Panel"
KY0072.VSD
on
on