Advertisement
1. Your assembly should include
A. 2- "A" (end) Panels
B. 2- "B1" (side) Panels
C. 2- "B2" (side) Panels
D. 2- "C" (access) Panels
E. 1- "Cw/d" (access) Panel
F. 1- "D1" (roof) Panel
G. 1- "D2" (roof) Panel
H. 4- Outside Corner Anchoring Brackets (1 ½" x 1 ½")
I. 5- Inside Anchoring Brackets (3" x 3")
J. 4- Inside Roof Clips
K. 2- Roof Cover Plates
L. 1- Inner Roof Connection Bracket (with tab)
M. 1- Package of Anchors
N. 1- Package of Hex headed screws
O. 1- Masonry Bit
P. 1- Magnetic Chuck
2. Tools you will need
A. Hammer
B. Drill
C. ¾" Wrench
The information contained herein is intended for the use of the individual(s) named above and those authorized to receive it. Dissemination, distribution
or copy of this information is strictly prohibited.
Model No. 1000-AL Series
Model No. 1000T-AL Series
CONTENTS
Advertisement
