Windows 10; Establishing A Connection - Beckhoff CU8210-D001-0102 Manual

4.2

Windows 10

The configuration software from Realtek is not required with Windows 10. The configuration is done using
standard Windows tools or with the help of configuration software from Beckhoff if the WLAN stick is to be
used as an access point.
4.2.1

Establishing a connection

In this work step we show you how to establish a WLAN connection. In this example, the IP address is
automatically assigned by a DHCP server.
Requirements:
• WLAN key (password).
Proceed as follows:
1. Click the network icon at the bottom right in the taskbar to display all WLANs in range.
2. Choose the appropriate network and click Connect.
3. Enter the WLAN key for the network in order to establish the connection.
ð You have successfully established a WLAN connection. For more information about the network, see
Start > Settings > Network & Internet > Wi-Fi.
CU8210-D001-0102 Version: 1.3
Configuration
19