Bowl Unit - Toto WASHLET TCF803CG Instruction Manual

Maintenance
Gap between the Main Unit and Bowl Unit
You can remove the main unit to clean
the top of the bowl unit and the bottom of
the main unit.
1
Remove the cover on the left side
of the main unit, and flip the power
switch to "OFF".
(Page 28)
2
Remove the main unit (a string is attached to the bottom of the main
unit).
• Pull the main unit toward you while pressing the "Main unit removal button".
Base plate
Attention!
• Do not pull the unit with undue force
(The main unit is connected to the base plate using a string.)
Main unit
Base plate
3
Clean the top of the bowl unit and the bottom of the main unit.
• Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft cloth soaked in
water so that no detergent remains.
32
Gap between the Main Unit and Bowl Unit
(Approximately once a month)
Soft cloth soaked in water Toilet paper, etc. (May cause damage.)
If the power switch is not turned "OFF", the
unit may malfunction or cause a failure or
electric shock.
Main unit removal button
String
(approximately 3 cm)
Top of the bowl unit
Gap between the Main Unit and Bowl Unit
4
Mount the main unit.
(1) Lift the main unit, then lower it straight down while threading the power cord and water supply hose into
the recess on the bowl unit.
Attention!
• Be careful not to pinch the power cord.
• Do not excessively bend the water supply hose.
(2) Align the main unit with the center of the
base plate and press it firmly onto the
base plate until a click sound is heard.
CAUTION
Push the main unit firmly on to the
base plate until a click sound is
heard.
(Failure to do so could cause the main
unit to come loose resulting in injury.)
After mounting, check that the main unit does
not detach even when pulled.
5 Flip the power switch to ON.
• The "Power" LED lights up.
6
Reinstall the cover.
(Page 29)
(Approximately once a month) (Continued)
Base plate
Click
(Page 28)
33