PHD GRS Series Repair Procedures

SERIES GRS GRIPPER REPAIR PROCEDURES
PHD, Inc. makes no warranty as to the fitness of its products or as to the length of service life after being repaired or parts replaced by anyone other than
authorized employees of PHD, Inc. In no event shall PHD, Inc. be liable for loss of profits, indirect, consequential, or incidental damages arising out of the use
of PHD Products.
WARNING: Units with -FSE2 and -FSR2
options contain compressed springs. For
complete disassembly procedures, see the
following page.
AVISO: Las unidades con opciones -FSE2 y
-FSR2 contienen muelles comprimidos. Véase
procedimiento de desmontaje en la página
siguiente.
ATTENTION : Les modèles avec options -FSE2
et -FSR2 contiennent des ressorts comprimés.
Voir page suivante pour la procédure de
désassemblage complète.
ACHTUNG: Einheiten mit der Option -FSE2
und -FSR2 sind mit komprimierten Federn
ausgestattet. Zur Demontage bitte die folgende
Seite beachten !
FIGURE 2
-FSR2
OIL WICK
(SIZE 50 & 63 ONLY)
FIGURE 3
ROD SEAL
PISTON
PISTON SEAL
BORE PLUG
SEAL
BORE PLUG
RETAINER
BORE PLUG
DRIVER
PISTON
ASSEMBLY
FASTENER
PISTON
SPRING
PISTON
PISTON ASSEMBLY
FIGURE 4
FASTENER (ROD
THREADS DIRECTLY
INTO DRIVER ON
SIZES 50 & 63)
COUNTERBORE
FOR ROD
CAM DRIVER
JAW
TARGET PIN
(UNITS WITH CU
SENSOR READY
OPTION)
FIGURE 5
-FSE2
For additional technical assistance, call or visit our website:
JAW COVER ASSEMBLY
FASTENERS
JAW COVER
ROD
BODY ASSEMBLY
AIR FILTER
(SIZE 50 & 63 ONLY)
ROD SEAL
(SEE FIGURE 2)
YELLOW SPRING
(OPTION -FSR2)
PISTON
PISTON SEAL
PISTON ASSEMBLY
FASTENER
BLUE SPRING
(OPTION -FSE2)
BORE PLUG SEAL
BORE PLUG
BORE PLUG
RETAINER
FIGURE 1
P.O. Box 9070, Fort Wayne, IN 46899
www.phdinc.com
1-800-624-8511
6441-426A
JAW SEAL