Advertisement
Active Noise Cancellation function (ANC function)
•
Touch and hold the left or right MFB for 2 seconds each time, the function will
switch as follows with voice prompts.
•
When the prompt "ANC on" can be heard, the ANC function is switched on and the
monitor function (listening to ambient noise) is switched off.
•
When the prompt "ding ding" is heard, the ANC function is switched off and the
monitor function is switched on.
•
When the "ANC off" prompt is heard, the ANC function and the monitor function
are switched off.
Mono mode (Single earbud use)
Note: Single channel mode only needs to remove one of earbuds from the charging
•
case. If two earbuds are removed from the case before connection, the earbud will
be used in bilateral channel mode by default.
•
Take out an earbud from charging case, the earbud will automatically turn on and
reconnect to previously connected devices.
•
To switch from one earbud to the other when playing music, remove the second
earbud from the charging case. The two earbuds will connect automatically. Put
the first earbud (the one you no longer wish to use) into the charging case and the
switching process completes.
Restore factory settings
•
If the earbuds cannot pair or disconnect frequently, please restore the factory
settings.
•
Place the earbuds in the charging case, leave the lid of the charging case open,
then touch and hold the left and right MBF for 5 seconds. When the earbuds
Indicators turn orange for 3 seconds, the reset is completed.
Charging
Case:
•
Charge the case using the Type-C cable connected to a computer or wall charger.
The indicator at the front of the charging case flashes white when charging and
turns white when fully charged. Charging time is approximately 2 hours
Earphones:
•
Low battery will be warned by voice prompt.
•
Put the earbuds back into the charging case for charging. While charging, the
indicators flash white. Once full charge, the white lights turn off. The number of
lights indicates the charging case battery status when the earbuds are placed in
the case.
Advertisement
