Advertisement
OPERATION
Step 1: Turn on the device.
•
Long press the power button for 3 seconds.
•
The LED 1 flashes green light once and LED 2 flashes blue and yellow lights
simultaneously for one second.
Step 2: Adjust the volume of the spray.
•
After turning on the device, press the adjust button to adjust the volume of the
spray.
•
The LED 2 will flash indicating the following:
LED 2
Status
Yellow
Indicates small spray
Blue
Indicates large spray
Step 3: Adjust the spray sensitivity.
•
After turning on the device, press the adjust button for 3 seconds to adjust the
sensitivity.
•
The indicator lights LED 1 and LED 2 will flash as follows:
LED 1
Flashes yellow light
LED 2
Flashes blue and yellow light
•
If the indicator lights flash once, it indicates the device has been adjusted to low
sensitivity.
•
If the indicator lights flash twice, it indicates the device has been adjusted to high
sensitivity.
Step 4: Turn off the device.
•
Long press the power button for 3 seconds.
•
The LED 1 flashes green light 3 times.
Advertisement
