Gigaset A670A Manual page 8

Getting started
Connecting the base station to the telephone network and the
mains power supply
3
Notes
u
The power adapter must always be connected, as the phone will not operate without a
power supply.
u
Use only the supplied power adapter and phone cord. Pin connections on telephone
cables can vary (pin connections,
Mounting the base station on the wall (optional)
approx.
2 mm
Connecting the charging cradle (if included)
2
6
1
2
¢
page 61).
¤
Connect the flat plug to the charging cradle
¤
4
Plug the power adapter into the power socket
If you have to remove the plug from the charging cradle
again:
1
¤
Disconnect the power adapter from the mains
power supply.
¤
Press the release button
3
plug
¤
Insert the phone cable into the con-
nection socket
base until it clicks into place and
feed under the cable protection.
¤
4
Insert the power cable for the power
adapter into the connection socket
at the rear of the base and rotate
2
the right-angle plug under the cable
protection.
¤
Connect the power adapter
¤
Connect the phone jack
60 mm
.
4
1 at the rear of the
3
4 .
1
and disconnect the
3
.
.
2
.