Summary of Contents for fantastic furniture Casa Single bed
Page 1
Version 1.0 Casa Single bed fantasticfurniture.com.au...
Page 2
Hanging objects on, or playing on the roof bars can cause the bars to break and may result in injury. Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture fantasticfurniture.com.au Page 2...
Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten screws Identify and lay out all of the components until the item is fully assembled. before you begin assembly.
What you need to assemble the product (Tool not provided) (Tool not provided) soft head mallet Phillip head screwdriver (P2) (P1) (P4) (P7) (P8) (P5) (P7) (P3) (P1) (P6) (P9) (P2) (P3) (P6) Parts List: (P4) Side posts (P3 & P4) (P5) Slats (P9) Rails (P1, P2, P5, P6, P7 &...
Page 5
Step 1 You will need 8 x Flat 4 x Steel Washers Dowels (H10) (H1) 1 x Allen 8 x Short Bolts (H2) (H9) 8 x Spring Washers (H14) Fixing Kit: How to screw into a steel dowel? Make sure the opening of steel dowels face the incoming bolts. Screw one bolt into the dowel, keep it loose, then screw another bolt.
Page 6
Step 2 You will need 4 x Locking 1 x Spanner Pins (H8) (H7) 4 x Halfmoon 8 x Wooden Nuts Dowels (H11) (H6) 4 x Hex Nuts (H12) (H11) (H6) (H12) (H7) (H6) (H8) (P4) (P5) (P3) (H12) (H11) (H8) (H6) (H6)
Page 7
Step 3 You will need 4 x Steel 8 x Flat Washers Dowels (H10) (H1) 8 x Short Bolts 1 x Allen Key (H2) (H9) 8 x Spring Washers (H14) (H9) (H2) (H14) (H10) (H1) (P2) (P1) (P4) (P3) Insert 2 x steel dowels (H1) into the holes of the side posts (P3 & P4) as shown. Align panels (P1) and (P2) to the steel dowels (H1), ensuring the steel dowels (H1) face the incoming bolts (H2).
Page 8
Step 4 You will need 2 x Locking Pins (H7) 4 x Wooden Dowels (H6) (H6) (H7) (H6) (P4) (P3) (P5) (P6) (P6) Insert 4 x wooden dowels (H6) into the side posts (P3 & P4) by hand or using a soft head mallet. Screw in 2 x locking pins (H7) into the side posts (P3 &...
Page 9
Step 5 You will need 2 x Halfmoon Nuts (H11) 2 x Hex Nuts (H12) 1 x Spanner (H8) (H11) (H12) (H8) (P4) (P5) (P3) (P6) (P6) Attach the rail (P5) to the side posts (P3 & P4) by putting 2 x halfmoon nuts (H11) and 2 x hex nuts (H12) onto the 2 x locking pins (H7) as shown.
Page 10
Step 6 2 x Locking 2 x Halfmoon Pins Nuts (H7) (H11) 4 x Wooden 2 x Hex Nuts Dowels (H12) (H6) 1 x Spanner (H8) (H12) (H6) (H7) (H8) (H11) (H6) (P4) (P5) (P3) (P6) (P3) (P6) (P4) (P5) Repeat Steps 4 &...
Page 11
Step 7 You will need 6 x Wooden Dowels (H6) (H6) (H6) (P4) (P5) (P3) (P6) (P3) (P6) (P4) (P5) Insert 6 x wooden dowels into the holes on all panels (P1), (P2), (P3), (P4). fantasticfurniture.com.au Page 11...
Page 12
Step 8 You will need 4 x Long Bolts 4 x Flat Washers (H4) (H10) 4 x Barrel Nuts 1 x Allen Key (H5) (H9) 4 x Spring Washers (H14) (H9) (H4) (H14) (H10) (H5) (P7) (P7) (P4) (P5) (P3) (P6) (P3) (P4)
Page 13
Step 9 You will need (H9) 2 x Long Bolts (H4) (H10) (H4) 2 x Flat Washers (H10) (H14) 2 x Spring Washers (H14) 2 x Barrel Nuts (H5) (H5) 1 x Allen Key (H9) (P8) (P7) (P7) (P4) (P3) (P6) (P5) (P6)
Page 14
Step 10 You will need 1 x Allen Key (H9) (P8) (P1) (P2) (P1) (P7) (P2) (P7) (P4) (P5) (P3) (P6) (P3) (P6) (P4) (P5) Tighten all long bolts (H4) with the allen key (H9) fantasticfurniture.com.au Page 14...
Page 15
Step 11 You will need: 8 x Locking Lids (H13) (H13) (H13) (P5) (P6) (P6) (P5) Cover the 8 holes in the side rails and end (P6 & P5) by using the 8 x locking lids (H13). Page 15 fantasticfurniture.com.au...
Page 16
Step 12 You will need 8 x Wood Screws (H3) (P4) (P3) (P5) (P9) (H3) (P3) (P6) (P5) (P4) Place end slat of (P9) elastic side down on the side rail ledge, between the wooden blocks and end panel (P5). Lay out slats along the bed.