Power Supply And Current Draw - Hanbay RC-AC Series User Manual

Power Supply and Current Draw

The RCx-AC-xxxAx actuator may be connected to voltages within
110-240 VAC.
The current draw will range from minimum 10 mA to maximum 1.5 A while
the actuator is active. When not moving, the actuator draws approx. 5 mA.
AC power is connected to the WHITE & BLACK wires with crimp
connectors (WM18225-DN & WM18230-ND 18-22 AWG).
Ground is connected on the
AC Input
Black – Live
White – Neutral
Page 4 of 17
Rev.2021.11
GREEN ground screw, shown below.
User Manual RCx-AC-xxxAx-8.09
AC Voltages
AC Gnd common to PWR Gnd
Internal Wires for 24 VDC
(Already Connected)
White +24 VDC
Black 0 VDC
Ground Connection
www.hanbayinc.com | 1 800 315 4461
hanbaysales@hanbayinc.com