C/ La Banyeta Nova, 11 - P.I. La Banyeta, 17843 Palol de Revardit (Girona) - Catalonia - Spain Description of product MDROO Series are light horizontal single-stage centrifugal pumps made in SS, with threaded axial inlet and threaded radial outlet for easy installation and service.
2340 2 IE3 I. GENERal Motor efficiency MDROO Series of pump ara horizontal single stage centrifugal pump. It is connected (according IEC 60034) with motor by direct connection. The overall structure is very compact. The flow Number of poles components of the pump are made of stainless steel. It can resist slight corrosion.
VI. PUMP INSTallaTION Motor DN S DN D Weight Model (3HP/1HP) 1. The pump shall be installed in a well ventilated, free of freezing, free of sun an rain. Power 2. The pipeline of suction inlet shall be as short as possible. An elbow shall be used in Phase (mm) Inlet...
IX. DISaSSEMBlE aND aSSEBlE The acoustic noise emision is around 75 dB(A) Before open the terminal box, plesae shut off the power supply to prevent from power shock The following steps should be done by the professional staff. VII. OPERaTION 1.
XI. IMPORTaNT NOTICE X. TROUBlE aND TROUBlE SHOOTING 1. Customers will not be advised if this manual is updated. 2. Pump will be guaranteed for one year under normal operation with the correct Fault Cause Solution model. Wearing part is not included. 1.
Need help?
Do you have a question about the MDROO Series and is the answer not in the manual?
Questions and answers