Hillsdale Furniture 4149-831 Quick Start Manual

HILLSDALE
FURNITURE, LLC.
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure
that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult
assembly is required. Customer Service Phone Number: 502-562-0000
TO OLS NEE DED FO R ASSE MB LY
ALLE N WRENCH ( SUP PLIE D)

HARDWARE LIST

A (4) Allen Bolts 1/4” x 1-5/8”
B (4) Allen Bolts 1/4” x 1”
C (4) Spring Washers 1/4”
D (4) Flat Washers 1/4”
E (1) Allen Wrench
J (8) Allen Bolts 1/4” x 1/2”
K (4) Plastic Foot Caps
A
C

STEP 1

Begin assembly by attaching each Leg
Panel (G) together by crossing and fitting
in place. Once in place, attach the Stool
Top (F) to the top of each piece and secure
with 4 Allen Bolts (A), 4 Spring Washers
(C) & 4 Flat Washers (D) to hold in place.
Do not fully tighten bolts for this step.

STEP 2

Next attach the Support Ring (H) to the
inside of each Leg Panel (G) by aligning
holes and securing with 1 Allen Bolt (B) per
each leg. Tighten all bolts from Steps 1 and
2 using the Allen Wrench (E) that has been
provided.

STEP 3

Insert each Plastic Cap (K) into the bottom
of each leg on the Leg Panels (G) for floor
protection. The assembly of the 24” Stool
is now complete.
For assembly of the 30” Stool, please see
Page 2.
CARE & MAINTENANCE: The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for
polishing, as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.

PARTS LIST

F (1) Stool Top
G (2) Leg Panels
H (1) Support Ring
I (4) Leg Extensions
B
D J
BACKLESS STOOL
Model #4149-831
Model #4150-831
E
D
C
D
A
C
A
G
B
K
Revised Date:
02-12-09
Page 1 of 2
F
G
H
K