Advertisement
Available languages
Available languages
STORAGE
Before storing your vac. The dust tank should be emptied and cleaned. The cord
should be wrapped and hung on the unit and the accessories should be kept in
the accessory holder so they can be readily available. The vac should be stored
indoors.
TROUBLESHOOTING
Faults can occur on all electrical equipment. This must be due to a defect in the
device itself. So check first with table if the fault can be dealt with.
PROBLEM
Appliance does not
work.
Appliance does not
vacuum.
Appliance
run
unusually loud.
Foam or liquid escapes
from the ventilation
outlets when vacuum
cleaning.
WARNING!
Never try to repair a defective device, or a device you believe to be defective,
by yourself. You can put both yourself and future user in danger. Repairs my only
be carried out by authorized specialists.
15
IN THE EVENT OF PROBLEM
POSSIBLE CAUSES
-Plug is not inserted.
-Appliance is not switched
on.
-Power outlet does not carry
any power.
-Mains lead is damaged.
- Dust bag / filters are full
and/or clogged.
- Hose, tubes or nozzles are
clogged up.
Sucked in particles have
become jammed.
Switch the appliance off
immediately and withdraw
the mains plug.
SOLUTIONS / TIPS
- Insert plug.
- Switch on appliance.
- Use another power outlet.
- Send the appliance for
repair.
- Check the fuse in fuse box.
- Change dust bag / filters.
- Eliminate clogging.
Remove particles
- Empty the container and,
if necessary, add some
anti-foaming agent.
- Carry out function check
on the float valve before
switching the appliance
on again.
Advertisement
