After selecting R
played for entering the address for the remote unit:
Enter Test Unit
Address:XX
Use the number keys to type the address of the remote DSU; then press
. The test pattern selections are displayed. After a test pattern is select-
ter
ed, the system briefly displays Please Wait.
Test Results
If the test is successful the status menu is displayed. If not, Unable to
Execute Test is displayed.
Interpreting Test Results
If the unit is functioning properly, the display should show:
TST ERR = 00
61200270L1-20
from the menu, the following prompt is dis-
U
EMOTE
NIT
DSU III ARdc User Manual
Chapter 11. Testing and Troubleshooting
En-
11-21