Before Playback - Aiwa XP-R210 Operating Instructions Manual

A
B
10

BEFORE PLAYBACK

HOLD switch b A
Release the HOLD switch before playback. b a
When not using the unit, set the HOLD switch to the
HOLD position. b b
Accidentally pressed button will not function.
If buttons are pressed when the HOLD switch is set to
HOLD position, "HOLd" flashes in the display.
Turning on and off b B
Turning the power on
Press e PLAY/PAUSE. Power is turned on and
playback starts.
Note
"Err" appears on the display when you play a disc placed
upside-down or a defective disc.
Turning off the power
If no new operations are done within 30 seconds from
the end of last operation, the power is turned off
automatically. (Auto power off function)
• You can turn off the power by pressing sSTOP/OFF/
CHARGE before it is automatically turned off.
Standby mode b B
When an operation finishes, the unit goes into standby
mode until the auto power off function automatically turns
off the power.
To enter standby mode, press ePLAY/PAUSE to start
playback, then press sSTOP/OFF/CHARGE.
English