Page 2
XP-R210 OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG MODE D’EMPLOI COMPACT DISC PLAYER WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
TABLE OF CONTENTS English PRECAUTIONS ............4 CAUTION USING ON RECHARGEABLE BATTERIES ..... 6 Use of controls or adjustments or performance of USING ON DRY CELL BATTERIES ......8 procedures other than those specified herein may result USING ON AC HOUSE CURRENT ......8 in hazardous radiation exposure.
PRECAUTIONS English To maintain good performance • Do not use the unit in places which are extremely hot, cold, dusty or humid. In particular, do not use or keep the unit in following places. • in a high humidity area such as a bathroom •...
USING ON RECHARGEABLE English BATTERIES • When using on the rechargeable batteries for the first time, charge them until the battery indicators go out. • Before charging the batteries, close the disc compartment. You cannot charge the batteries while it is opened.
USING ON DRY CELL BATTERIES English Open the battery compartment and insert two LR6 (size AA) alkaline batteries with the 0 and 9 marks correctly aligned. Battery replacement The OPE/BATT indicator changes from F (green) to M (orange) to E (red) according to the remaining power of the batteries.
BEFORE PLAYBACK English HOLD switch b A Release the HOLD switch before playback. b a When not using the unit, set the HOLD switch to the HOLD position. b b Accidentally pressed button will not function. If buttons are pressed when the HOLD switch is set to HOLD position, “HOLd”...
Page 8
BEFORE PLAYBACK English Adjusting the sound b C Volume Turn the VOL control to adjust the volume. Press DSL repeatedly for more powerful sound and deeper bass. : Deep bass is emphasized. : Deep bass is strongly emphasized. : Normal sound Signal sound function b C You can check the operation by beep sound when you press an operation button.
PLAYBACK English Connect the supplied headphones to the PHONES/LINE OUT jack. 1 Release HOLD. 2 Place a disc. 3 Press ePLAY/PAUSE. Playback starts from the first track. a track number b elapsed playing time Basic operation To stop Press sSTOP/OFF/CHARGE. To pause Press ePLAY/PAUSE.
Page 10
PLAYBACK English E•A•S•S PLUS (Electronic Anti-Shock System) The E•A•S•S PLUS function reduces skipping or muting of the sound when the unit is subjected to shocks. The player keeps about 48 seconds or 12 seconds of playback sound in its memory. To keep 48 seconds in the memory, set the E•A•S•S switch to 48.
Page 11
PLAYBACK English Random play b D Press PLAY MODE in standby mode to display Tracks on the disc are played in random order. To cancel random play, press PLAY MODE in standby mode. display changes to Note • You cannot back to previous track by pressing r during random play.
PROGRAM PLAY English Up to 24 tracks can be chosen for program play. 1 Press ENTER/DISP in standby mode to display 2 Select the desired track by pressing r and t. a track number b program number 3 Press ENTER/DISP within 8 seconds. If it is not pressed within 8 seconds, the track number changes to 00.
RADIO RECEPTION English Tuning in to a station 1 Press TUNER ON/BAND repeatedly to select AM or FM. 2 Press TUNING + (t) or - (r) to tune in to a station. After listening, press sSTOP/OFF/CHARGE to turn off the radio. For quick tuning Keep either TUNING + (t) or - (r) pressed for about 1 second.
Page 14
RADIO RECEPTION English Presetting stations b A You can preset up to total of 30 stations on AM and FM. 1 Press TUNER ON/BAND repeatedly to select AM or FM. 2 Press TUNING + (t) or - (r) to tune in to a station.
CONNECTING AN EXTERNAL UNIT English Use a commercially available connection cord which has a 3.5 ø stereo mini-plug at one end and two phono plugs at the other end. Connect the stereo mini-plug to the PHONES/LINE OUT jack of the unit and connect the phono plugs to the analog input terminals of the external unit.
MAINTENANCE English To clean the lens b A If the lens becomes dirty, the player will skip or not play. If this occurs, clean the lens in the following manner. To remove dust or dry particles, first use a camera lens blower/brush a to blow a few times to loosen particles, then gently brush the lens b clean.