One for All URC-4220 User Manual page 12

All manuals and user guides at all-guides.com
CHANGING VOLUME LOCK
The One For All 4 Device Universal Remote Control is set at the factory for
independent volume control of each selected device. However, you may
change the Volume Lock setting to
ume will be locked to one mode (e.g., to control TV volume in all other
modes).After that, if desired, you can perform
selected device to set its volume control for independent operation.
Locking Volume Control To One Mode
(Global Volume Lock)
1. Press and hold
then release
SET
2. Enter - -
9 9 3
The will blink twice.
LED
3. Now, when you press
the selected device (e.g.,
of the mode you have selected.
Unlocking Volume Control For A Single Device (Individual Volume
Unlock)
1. After performing
mode key where you want volume to be unlocked (e.g.,
) and controlled within its own mode.
DVD
2. Press and and hold
then release
SET
3. Enter - -
9 9 3
four times.
4. If desired, repeat steps 1 through 3 (of this section) for
each device that you want volume to be unlocked.
5. Now, after you select a device that has volume unlocked
(e.g., ), pressing
DVD
device's volume only in its own mode.
Unlocking All Volume Control (Restoring Default Setting)
NOTE: Performing these instructions will restore independent volume control for all pro-
grammed devices (e.g., TV volume control in TV mode, VCR volume in VCR/PVR mode,
etc.).
1. On the remote control, press and hold
light) blinks twice,then release
2. Enter - -
9 9 3
blink four times.
Global Volume Lock so that a device's vol-
Individual Volume Unlock
until the (red light) blinks twice,
SET LED
.
and then press any mode key once (e.g.,
, , or , the volume of
VOL + VOL - MUTE
) will be controlled, regardless
TV
(above),press a desired
Global Volume Lock
until the (red light) blinks twice,
SET LED
.
and then press once. The
VOL - LED
, , or will control the
VOL + VOL - MUTE
until the
SET
.
SET
and then press once. The
VOL +
13
on a
).
TV
will blink
(red
LED
will
LED