Download  Print this page

LG E1910S Owner's Manual

Lcd monitor
Hide thumbs

Advertisement

Quick Links

OWNER'S MANUAL

LCD MONITOR

Please read this manual carefully before operating your set and
retain it for future reference.
LCD MONITOR MODEL
E1910T
E2210T
E1910S
E2210S
www.lg.com

Advertisement

loading

  Related Manuals for LG E1910S

  Summary of Contents for LG E1910S

  • Page 1: Lcd Monitor

    OWNER’S MANUAL LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LCD MONITOR MODEL E1910T E2210T E1910S E2210S www.lg.com...
  • Page 2: Important Precautions

    Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing.
  • Page 3 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
  • Page 4: On Cleaning

    Important Precautions On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching.
  • Page 5 Accessories !!! Thank for selecting LGE products !!! Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. User's Guide/Cards DVI-D Signal Cable (This feature is not available in all countries.) (Only E1910T/E2210T NOTE...
  • Page 6: Connecting The Display

    Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand Place the monitor with its front facing downward on a soft cloth. Assemble the Stand Body into the product in the correct direction as shown in the picture.
  • Page 7: Disassembling The Stand

    Connecting the Display Disassembling the stand Put a cushion or soft cloth on aflat surface. Change your lock on the product as it follows and turn it in the arrow direction. If you can't release the stand base even the locking knob is at a release position, Please push the indicated knob down and retry it.
  • Page 8 Connecting the Display Pull out the Stand to remove. Pushing the PUSH button, Take the stand body from hinge body. Good Position Bad Position Warning: You can hurt your finger.
  • Page 9: Positioning Your Display

    Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display -After installation, adjust the angle as shown below. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚...
  • Page 10: Connecting With The Pc

    Connecting the Display Connecting with the PC Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connect signal input cable of the signal cable. Connect DVI-D(Digital signal) Cable Connect D-sub(Analog signal) Cable NOTE This is a simplified representation of the rear view.
  • Page 11 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. E1910S/E2210S Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure.
  • Page 12: Control Panel Functions

    Control Panel Functions Front Panel Controls E1910T/E2210T E1910S/E2210S MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear.
  • Page 13: Power Indicator

    (display mode). The best display mode is E1910T/E1910S : 1280 x 1024 E2210T/E2210S : 1680 x 1050 When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. When only one signal is connected, it is automatically detected.
  • Page 14: On Screen Display (Osd) Control Adjustment

    On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.
  • Page 15: On Screen Display(Osd) Selection And Adjustment

    On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR COLOR TEMP (PRESET / USER) GAMMA HORIZONTAL DISPLAY VERTICAL CLOCK PHASE LANGUAGE OTHERS POWER INDICATOR WHITE BALANCE FACTORY RESET...
  • Page 16 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears.
  • Page 17 On Screen Display(OSD) Selection and Adjustment Main menu Exit : Exit : Decrease : Increase : Select another sub-menu : Restart to select sub-menu Exit : Exit : Decrease : Increase : Select another sub-menu : Restart to select sub-menu Sub menu Description To adjust the brightness of the screen.
  • Page 18 On Screen Display(OSD) Selection and Adjustment Main menu E1910T/E2210T E1910S/E2210S Exit : Exit : Decrease : Increase : Select another sub-menu : Restart to select sub-menu Sub menu Description HORIZONTAL To move image left and right. To move image up and down.
  • Page 19 On Screen Display(OSD) Selection and Adjustment Main menu Exit : Exit : Decrease : Increase : Select another sub-menu : Restart to select sub-menu NOTE If this does not improve the screen image, restore the factory default settings. If necessary, execute the WHITE BALANCE function again.
  • Page 20 Menu. Press the MODE Button, then the main menu of the OSD appears. Menu Name E1910T/E1910S Icons NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual.
  • Page 21 On Screen Display(OSD) Selection and Adjustment Main menu When F-ENGINE is not NORMAL,CONTRAST can not be selected. E1910T/E1910S E2210T/E2210S E1910T/E1910S E2210T/E2210S E1910T/E1910S E2210T/E2210S Exit : Exit : Move : Select another sub-menu Sub menu Description NORMAL Select this when you want to use the product in the most general using environment.
  • Page 22 On Screen Display(OSD) Selection and Adjustment (Only E2210T/E2210S) Main menu Exit : Exit : Move : Select another sub-menu Sub menu Description WIDE Switch to full screen mode according to input image signal. ORIGINAL Change the input image signal ratio to original.
  • Page 23 When PHOTO EFFECT is not NORMAL,CONTRAST can not be selected and COLOR is grey.When COLOR is selected down, PHOTO EFFECT is back to NORMAL and CONTRAST can be selected now. PHOTO EFFECT and F-ENGINE should not be unnormal at the same time. E1910T/E1910S E2210T/E2210S E1910T/E1910S E2210T/E2210S...
  • Page 24 On Screen Display(OSD) Selection and Adjustment Main menu E1910T/E1910S E2210T/E2210S E1910T/E1910S E2210T/E2210S Exit : Exit : Move : Select another sub-menu Sub menu Description SEPIA This menu changes the screen to be Sepia tone (brown color). MONOCH This menu changed the screen to be Gray tone(black-and-white Picture) .
  • Page 25: Troubleshooting

    Troubleshooting Check the following before calling for service. No image appears No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power indicator flickering? Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE"...
  • Page 26: Display Image Is Incorrect

    Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. IMPORTANT Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed.
  • Page 27 • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. • Make sure to check if the video card supports Plug&Play function.
  • Page 28: Specifications

    Specifications Display 48.2 cm (19 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 48.2 cm 0.294 x 0.294 mm (Pixel pitch) Horizontal Freq. Sync Input Vertical Freq. Input Form Signal Input Video Input Input Form Resolution Recommend Plug&Play DDC 2B(Digital),DDC2AB(Anlaog)
  • Page 29 2.8 kg (6.26 lb) Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing ), Detached ( O ) E1910S 5.82 cm ( 2.29 inch)
  • Page 30 Specifications Display 55.8 cm (22 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 55.8 cm 0.282 x 0.282 mm (Pixel pitch) Horizontal Freq. Sync Input Vertical Freq. Input Form Signal Input Video Input Input Form Resolution Recommend Plug&Play DDC 2B(Digital),DDC2AB(Anlaog)
  • Page 31 Specifications Display 55.8 cm (22 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 55.8 cm 0.282 x 0.282 mm (Pixel pitch) Horizontal Freq. Sync Input Vertical Freq. Input Form Signal Input Video Input Input Form Resolution Recommend Plug&Play DDC 2AB...
  • Page 32: Preset Modes (Resolution)

    Specifications Preset Modes (Resolution) E1910T/E1910S Display Modes (Resolution) 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 E2210T/E2210S Display Modes (Resolution)
  • Page 33: Installing The Wall Mount Plate

    Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device. Place the monitor with its front facing downward on a soft cloth. Separate the stand by pushing the PUSH button. Good Position Warning: You can hurt your finger.
  • Page 34 Installing the Wall mount plate Install the Wall mount plate. Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased.
  • Page 35 Make sure to read the Safety Precautions before using the product. Keep the OWNER’S MANUAL(CD) in an accessible place for furture reference. The model and serial number of the SET is located on the back or one side of the SET. Record it below should you ever need service.

This manual is also suitable for:

E1910s-bnE2210s-bnE2210sE1910tE2210t