Page 10
Mounting screws Mounting screws for arm Mounting screws for outer cover A. unit. (Longer one x 4pcs) (Shorter one x 4pcs) Mounting screws for footrest. (Shorter one x 2pcs) Footrest Outer cover A Outer cover B Outer cover B (L/R) (L/R) Mounting screws (2pcs)
Page 11
Keep space more than 20cm in the back so that the chair can recline and install/put the chair on the horizontal location. Footrest move up when the chair reclines. Keep space more than 60cm in the front and 20cm in the back before use.
Page 12
How to attach the footrest. (Power won't be on unless footrest is installed.) Locate the footrest in front of Insert the footrest connector the body of the chair. firmly until mounting sound is heard from the connecting point of connector. Make sure to hold the footrest connector itself and insert.
Page 13
How to attach the footrest part (Continuation) Insert the footrest connector Lift up mounting cover. firmly until mounting sound is Insert the footrest mounting part heard from the connecting point into attaching part. of connector. Make sure to attach without gap. Seat Mounting Lift up...
Page 14
How to attach the footrest part (Continuation) Insert the power plug of power cord into the outlet. Turn 「ON」 the power switch of main body. Power switch is located in the lower part of main body on left side. Press button and turn the power on.
Page 15
How to attach the remote stand. (It is attachable both left and right side.) Loosen 2 fixing screws in the back of arm unit a bit. Fixing screws Figure: back side of arm unit (L). Dent Remote control stand Loosen Front Rear side...
Page 16
How to attach the outer cover. (Both left and right side.) Hook and catch the outer cover A with the hooks on the main body.(3 parts) Match the hook part in the rear side and match the 2 hook part in the front side. 2 hook parts of front side are located inside the Hook part outer cover A.
Page 51
Recline the backrest and move with caster while holding the side of footrest. Pay attention to the foot and put down slowly not to pinch the power cord or remote cord. Put down slowly not to hit the floor when put the footrest down. Careful not to pinch your fingers between footrest and armrest.
Need help?
Do you have a question about the JP-970 and is the answer not in the manual?
Questions and answers