Page 1
Massage Chair : Kurodo Product Name Category: machinery and appliances general designation: business use User manual electric massage chair Refer to 10〜17 pages how to assemble each parts on the massage chair. 5009444 ●Thank you very much for purchasing Fujiiryoki massage chair.
Page 8
Pillow Turn back the pillow pad during massage Back pad Slowly lean against the back pad Remote control stand Power switch Turn the power switch OFF after use Backrest Massage whole the back area of the body Shoulder Air massage for shoulder Air massage for arm Waist/Buttocks (Pelvis) Air massage for waist, buttocks, around thigh...
Page 9
Rolling section Part insentive massage It does not work even if it is pressed.
Page 10
Setup and assembling Setup and assembling Armrest / Arm unit fixing screw 14 screws...
Page 13
Connect the Arm unit hose (gray/black/yellow) matching with color of whole hose. ①Match the groove of hose from arm Gray unit and projection of hose from main body, then insert it along the groove. ②Lock the both parts while pushing. Projection ※...
Page 18
Before starting massage every time Check around the chair Check the surroundings without fail Check to make sure that there is nobody, no pet and nothing ahead behind the chair and under the footrest. Switch on the power DANGER Do not use the chair other than on the designated voltage. Fire or electrification may occur. Insert the power plug firmly so that no dust is accumulated.
Page 19
Check the main body Check for torn on the cover cloth. DANGER Before use, hold the back pad and make sure that there is no tear on the cover cloth of the backrest and on the other parts. (Should there be any tear, no matter how small it is, discontinue using the chair immediately.
Page 20
Adjust the reclining and footrest angle DANGER Check to make sure that there is nobody, no pet and nothing ahead around the chair (back, front, side, and bottom part of main body) when reclined or footrest is moved. Failed to do so may cause accident or injury or damage of house holding.
Page 21
WARNING Do not place your leg or hand in the footrest adjustable place, when footrest is adjusted. It may cause accident or injury. Do not attempt to ride on the front portion of footrest or seat pad at the time of reclination. The chair may overturn and the user may fall down and hurt himself/herself.
Page 22
Whole body course will start when press button. Press button . Sensing(Body detection) begins. Refer to the page 23 [3. About sensing] for the details. (P.23) After sensing, whole body course begins and lamps of "ROLLER POSITION", "ROLLER STRENGTH", "UPPER/LOWER AIR" light up. Refer to the page 31 [For adjusting your favorite massage] to change the setting during the auto course.
Page 23
About sensing What is double sensing function? (“Sensing” ) This is the function that detect body shape and posture before starting auto course. 2 sensor functions gives effective massage with 『S shape line detecting system』 which detects the body shape and 『Shoulder position detecting knead ball system』...
Page 24
Adjust the air strength Display for Strength of lamp lights of lamp massage program air massage strength 9 levels 5 levels (Massage) (Air) weak ● The strength of 9 levels for massage program and 5 levels for air massage are selectable. light ●...
Page 25
Press button while selecting the auto course. Each auto course change to EX-MODE course. EX-MODE can not be set during sensing. Select EX-MODE after the sensing is finished. EX-MODE is canceled by pressing button again.
Page 26
Whole body course will start when press button. Press button . Sensing(Body detection) begins. Refer to the page 23 [3. About sensing] for the details. (P.23) After sensing, whole body course begins and lamps of "ROLLER POSITION", "ROLLER STRENGTH", "UPPER/LOWER AIR" light up. Refer to the page 31 [For adjusting your favorite massage] to change the setting during the auto course.
Page 28
Whole body course will start when press button. Press button . Sensing(Body detection) begins. Refer to the page 23 [3. About sensing] for the details. (P.23) After sensing, whole body course begins and lamps of "ROLLER POSITION", "ROLLER STRENGTH", "UPPER/LOWER AIR" light up. Refer to the page 31 [For adjusting your favorite massage] to change the setting during the auto course.
Page 29
Whole body course will start when press button. Press button . Sensing(Body detection) begins. Refer to the page 23 [3. About sensing] for the details. (P.23) After sensing, whole body course begins and lamps of "ROLLER POSITION", "ROLLER STRENGTH", "UPPER/LOWER AIR" light up. Refer to the page 31 [For adjusting your favorite massage] to change the setting during the auto course.
Page 30
Parts intensive massage Start to part intensive massage Whole body course will start when press button. Press button . Sensing(Body detection) begins. Refer to the page 23 [3. About sensing] for the details. (P.23) After sensing, whole body course begins and lamps of "ROLLER POSITION", "ROLLER STRENGTH", "UPPER/LOWER AIR"...
Page 31
There are unadjustable program depending on massage type. Refer to the page of “Basic techniques of Massage” for details. Adjust by using button. Knead ball position is adjustable when moving range of massage program is set as 「Part」 or 「Point」 . Display for Strength of lamp lights of lamp strength...
Page 33
There are unadjustable program depending on massage type. Refer to the page of “Basic techniques of Massage” for details. Pulse PULSE PULSE...
Page 37
Image of air supply Comfortable Firm massage is available by amount of shifting the speed of air massage. air supply (Strength) Amount of air Time In case of getting air massage at a constant speed In case of getting air massage at a different speed RPulse...
Page 38
Mecha massage function list table The list of adjustments that can be performed during each knead technique. knead technique Mecha Massage Mecha PROGRAM Massage position adjustment Strength speed width KNEAD UP WHOLE / PART / POINT KNEAD DOWN WHOLE / PART / POINT TAPPING WHOLE / PART / POINT WAVELET...
Page 39
● Pressing button resets remaining time, pressing button keeps remaining time. Massage operation stops once when press the manual program button to change it from auto course. When changing from auto course, press one of buttons and massage stops once. Then, press favorite massage button to start.
Maintenance and storage How to maintain the chair DANGER WARNING Do not connect or disconnect the power plug Make sure to unplug the power plug. by wet hands. Electrification may occur. Electrification may occur. Do not wipe with benzine, paint thinner or alcohol.
Page 41
How to move the main unit WARNING Do not move the chair while people or items are on the chair. Damage or injuries may occur. Do not haul the chair itself or move with the casters on the floor where it easily gets scratches. Do not pull the power chord or remote control chord with leg or wrap with caster.
Page 42
Q&A Left and right strength is different. And, I feel Is it ok to spread the hot carpet under the chair? the difference is remarkable. As there is a danger of flame, please stop. Heat genera- Rubbing ball To massage for a better slippage tion of hot carpet pains the body and thereby it might feeling, in connection with...
During massage, some creaky noises are made. Is it possible to completely cut off the air massage Is it ok? in the auto course? It is possible in the course other than stretch course and There is nothing abnormal in the structure. Refer to ex-mode stretch course.
Troubleshooting DANGER Do not remodel and also do not analysis or repair by yourself, there are chances of injury due to fire (or) abnormal operation You may encounter the following phenomena while in massage. As being due to the mechanical design, they have nothing to do with the product life. A "clatter"...
Page 45
Checkpoints WARNING When using the chair after a while, read the user manual once again, check to make sure that it operates normally to use again. Failing which may cause injury or accident. Are there these symptoms? For prevention of accident or trouble, turn "OFF"...
Need help?
Do you have a question about the Kurodo and is the answer not in the manual?
Questions and answers