Table of Contents
Advertisement
REPLACING BATTERIES
Battery Replacement
When the LCD display of transmitter or receiver show the Low Battery icon, follow the steps
below to replace:
Transmitter:
1.
Open the battery compartment cover located at the bottom of the transmitter by
pushing the elastic clasp
2.
Take off the used batteries and install x2 new AAA batteries according to the
polarity sign (+/-) shown in the battery compartment.
3.
Close the battery compartment cover back in place.
Receiver:
1.
Slide the rear clip following the direction of arrow at first, then will see a screw on
the battery cover, using a screwdriver to screw out the screw to open the battery
compartment cover.
2.
Take off the used batteries and install x2 new AAA batteries according to the
polarity sign (+/-) shown in the battery compartment.
3.
Screw the battery compartment cover back and slide back the clip in place.
Advertisement
Table of Contents
