Download Print this page

Richell PAW TRAX 60031 Instruction Manual

Advertisement

Available languages

Available languages

Quick Links

Thank you for choosing Richell's Product. Please read this instruction manual carefully before using this
product, and keep for future reference. If you give this product to someone else, please also give this
instruction manual to the new owner. Please note some parts of the figures shown below may be slightly
different from the actual product, for your better understanding of the structure and proper use.
l
This product is designed to be used as
an indoor potty for dogs.
Caution
l This product is designed to be used as an indoor potty for
dogs only. Do not use this product for anything other than its
intended purpose.
l Place this product with the rubber skid side on the floor and
the side without rubber feet on the wall. If used in the opposite
way, it may cause to slip and scratch the floor surface.
l Pay special attention to sharp corners and edges while
assembling or using this product to avoid personal injury.
l Place this product on a flat and stable surface.
Important!
l Do not drop or misuse this product. It may cause deformation
and/or product damage.
l Do not use outside.
Tray has top and bottom frame. The bottom frame has the rubber skid.
1. To Remove the Frame
① Open the tray and unlock the
lock located in center of the
frame.
② Remove the hooks on both
ends of the frame from the tray.
Frame
Tray
Using Mesh Panel (Mesh Panel can be used on both top and bottom frame.)
4. Attach the Mesh Panel
Insert the mesh panel between the hook on the inside
of the frame and the dent part and push the recesses
(6 places) on the mesh panel as shown in the figure.
The hooks of the mesh panel can be fixed to the dent
part on the lower side of the frame.
Hook on the
Hook on the
Frame
Frame
Dent Part
Dent Part
Mesh Panel Recess
Mesh Panel Recess
l Use water and mild detergent with soft cloth of sponge to clean.
l Do not use high temperature water, cleaning with a scrub brush
and/or using polishing power. It may cause deformation
discoloration and scratches.
l Use cresole or other disinfectants in accordance with the
instructions for each disinfectant.
UPC
Dimension
Product size (in use)
When it's folded
Material
Instruction Manual
l
Frame holds the potty pad firmly in place and is easy to change.
l
Includes non-skid rubber feet to prevent from sliding when it's used.
l
Includes removable Mesh Panel to keep your dog from chewing and tearing a pad.
2. Attach the Pad
(Attach the pad on both top and bottom of Tray)
Place the pad inside the tray.
* When use two pads, cover the protrusions
located inside the tray with the absorbent part
of the pad. Then, insert them using the tray.
Protrusions located
inside the tray
Absorbent part of the pad
Location of where to
cover with the pad
803840 600313 / 803840 600320
24.5"W x 17.5"D x 17.5"H
24.5"W x 17.5"D x 3.5"H
Tray, Frame, Mesh Panel : Polypropylene /
Axis : ABS resin / Rubber Skid : Elastomer
Manuel d' instruction
l Use the middle of Pad for potty. Using the edge of Pad may cause
to leakage.
l Make sure to attach the parts correctly to hold a pad. Parts and
pad may come off and cause an accident or damage.
l Do not lift this product with your dog to avoid unexpected accidents
and/or product damages. Lift the bottom base to transport this
product.
l Keep this product away from all heat sources at all times.
l When using this product as L-shape tray, make sure to use against
one side on the wall. If not, it may cause product damage and
accident.
Absorbent
part of the pad
5. How to Remove the Mesh Panel
Flip the frame and pull outward as
shown in the figure. Then, detach
the hooks on long side of the
mesh panel. In the same way,
detach the short side of hooks.
l Do not use harsh chemicals such as thinner, benzene or alcohol.
It may cause discoloration.
l After wash, wrap and dry in the shaded area away from direct
sunlight. It may cause deformation and discoloration.
3. Attach the Frame
① Insert the hook on both ends of the
frame into the recesses on both ends
of the tray,
② Then, attach the frame to the lock on
the convex part in front of the tray.
Hook on
Frame
Convex Part
Convex Part
Recess
Recess
* If the convex part of the tray is covered
with the pad, the frame will come off easily.
* Pad can be used on top
and bottom tray.
When using
two pads
Overlay the
Fold it in half
two pads
with facing
facing inside.
inside.
Designed by:
Richell Corporation, Japan
Distributed by:
Richell USA, Inc.
Grand Prairie, Texas 75050
Phone (972) 641-9795
Fax (972) 641-8495
www.richellusa.com
Visit us at
MADE IN JAPAN
80031
Pad
When using
one pad

Advertisement

loading

Summary of Contents for Richell PAW TRAX 60031

  • Page 1 Manuel d’ instruction 80031 Thank you for choosing Richell's Product. Please read this instruction manual carefully before using this product, and keep for future reference. If you give this product to someone else, please also give this instruction manual to the new owner. Please note some parts of the figures shown below may be slightly different from the actual product, for your better understanding of the structure and proper use.
  • Page 2 Merci d'avoir choisi le produit Richell. Merci de lire avec attention le manuel d'instructions avant l'emploi, et de le conserver pour vous y reporter ultérieurement. Si vous donnez ce produit à quelqu'un d'autre, merci de lui remettre également ce manuel d'instructions. Merci de noter que quelques-uns des schémas présentés ci-dessous peuvent être légèrement différents du produit réel, pour une meilleure compréhension de la...

This manual is also suitable for:

Paw trax 60032