Table of Contents
Advertisement
Valve spindle
Clearance:
approx. 1 mm
Set clearance:
Set approx. 1mm clearance
between valve spindle and screw
ball head
The mower Alpha 2000 / Alpha Sensor is serially equipped with height adjustable support
wheels (4.2) and support rollers (4.1).
The guiding of the hydraulic width adjustment are designed with maintenance free
plastic bushes and the sensors are designed with mainentance free two-sided closed
ball bearings. Due to that the mower requires only less time consuming maintenance
works. The support rollers are installed at the base frame and therefore, do not run
laterally in the ground and they have no lateral loads when adjusting the working
width.
Version: 1
Sensor Basic setting:
M8 x 30
3.1 Mounting for hydraulic
hoses
3.2 Mounting for joint shaft
Working position
picture 3
3.2 Halterung
Gelenkwelle in use
position
Page 11 of 16
Advertisement
Table of Contents
