Net Optics BPO-SX Installation Manual page 10

Power Loss Bypass (continued)
DC Plug Power Connector Models
The BPO-SX and BPO-LX models use a standard 5 VDC barrel connector
and power supply to power the switch .
RJ45 Power Connector Models
The BPO-SX-1 and BPO-LX-1 models use a Control Port with an RJ45 con-
nector to supply power to the switch directly from a source on the in-line de-
vice . A control cable with connectors appropriate for your in-line device was
provided with the switch . For information on how to connect the control cable
to your device, please refer to the documentation for your in-line appliance .
For
Control Port Pinouts:
Pin Number
1
2
3
4
5
6
7
8
Control Port pinouts, see below .
Description
Shunt to Pin 2
Shunt to Pin 1
No connection
No connection
No connection
No connection
Ground
+5 VDC
6
Optical Bypass Switch