Benetech GT5105A Instruction Manual page 9

3. Other items
Maintenance and warranty
4.1 Maintenance
4.1.1 Battery replacement and maintenance
(Please refer to Figure 5) If low voltage indicator appears, replace
batteries in time as following steps;
a. Turn off the instrument and remove relevant test leads.
b. Unscrew one screw at the bottom of battery door, and then
open the door
c. Please replace all six used batteries, put in new batteries, and pay
attention to polarity of batteries.
d. After replacing batteries, please install battery door and tighten
screws.
When the instrument is not used for a long time, please remove
batteries to prevent battery leakage and corrosion of battery
case and pole pieces.
Figure5
-14-
4.1.2 Case cleaning
Alcohol, diluent, etc. have a corrosive effect on instrument case,
especially the window; so when cleaning instrument case, wipe it
gently with wet towel.
4.1.3 Please prevent the instrument from getting wet.
4.2 Maintenance
4.2.1 If you have any following questions, please contact after-sales
service department of our company's marketing department
or agencies:
A. Instrument components are damaged.
B. LCD is abnormal.
C. In normal use, the error is too large.
D. Button operation failure or confusion.
4.2.2 If it is necessary to repair the instrument, please send the
instrument to a qualified professional maintenance personnel
or designated maintenance department.
Special statement:
a.Used batteries must be disposed of in accordance with local
laws or regulations
b.The company is not liable for any derivative results of using
this product.
c.The company reserves the right to update and modify the
design specifications and content of this product, and it is
subject to change without notice!
-15-