Removing The Legends - UniOP BKDC-16 Installation Manual

1) turn off the power to the panel
2) use a screwdriver to loose the four screws securing the block composed by the
two metal units
3) remove the block
4) remove the battery
5) replace the battery with a new one
Note:CAUTION! Danger of explosion if battery is incorrectly replaced .Replace
only with the same or equivalent type recommended by the
manufacturer.Dispose of used batteries according to the manufaturer's
instructions.
6) replace the block; tighten the four screws
7) apply power to the panel and check that battery good status is signaled.

Removing the Legends

The keyboard legends can be removed in one step by grasping the exposed portion of
the legend and sliding it downward.
Use the blank legends that come with the panel or other with equivalent thickness
and consistency. Do not use legends thicker than ones included in the panel.
Downloaded from StockCheck.com
Installation Guide
65