Aux Port - UniOP BKDC-16 Installation Manual

When the panel is in Operation Mode and is not as a UniNET Server, you can attach
a serial printer to the PC/Printer Port. The communication parameters for the printer
are defined by the application program (project file)
Note: the communication cable to the printer depends on the communication
interface of the printer.

AUX Port

The AUX Port is a communication port specially designed for industrial network
communication. The AUX Port connector is a 9 pin D sub type. The functionality of
the AUX Port depends on the optional communication module which is plugged into
the unit.
Note: The pin assignment of the Aux Port connector is described in the manual
of the communication module.
Downloaded from StockCheck.com
Figure 45 - Programming cable CA2
Figure 46 - Programming cable CA114
Installation Guide
61