Advertisement
Description
The 658 Tray Type Sheave is designed to help roll and
guide cable during tray pulls.
Tray-type Pulling Setup
Greenlee Textron Inc. / Subsidiary of Textron Inc.
Find Quality Products Online at:
Tray Type Sheave
2
GlobalTestSupply
www.
• Follow cable tray manufacturer's and cable
manufacturer's instructions when pulling cable
in tray.
• Read and understand instruction manual
included with cable puller.
Failure to observe these warnings could result in
severe injury or death.
Installation
1. Position the tray frame where needed.
2. Clamp at least 2 of the of the cable tray rungs
between the tray frame and clamp plate.
3. Fasten with carriage bolts and wing nuts.
RIGHT WAY
WRONG WAY
.com
815/397-7070
sales@GlobalTestSupply.com
Advertisement
