Advertisement
#
1 0153-0011-1000 | 8 | 1/4"-20 x 1-1/2" Lg. Screw (Stainless Steel)
2 0157-0023-1000 | 8 | 1/4" ID x 5/8" OD Washer (Stainless Steel)
3 0156-0001-1000 | 1 | Front Housing (Natural Kynar)
4 0156-0029-0100 | 1 | Front Housing with Flanges (Natural Kynar)
5 0156-0010-1000 | 1 | 0.157" CS x 6.457" ID "O" Ring (Viton)
6 0156-0023-1000 | 1 | 0.157" CS x 6.457" ID "O" Ring (Viton/Teflon) – Option
7 0156-0034-1000 | 1 | 0.157" CS x 6.457" ID "O" Ring (EPDM) – Option
8 0156-0016-1000 | 2 | Front & Rear Thrust Washer (Ceramic)
9 0156-0007-1000 | 1 | 4.500" Lg. Shaft (Ceramic)
10 0156-0004-0200 | 1 | Impeller w/Carbon Bushing (Natural Kynar)
11 0156-0004-0300 | 1 | Impeller w/Mica Teflon Bushings (Natural Kynar) – Option 11 0156-0064-0300 | 1 | Impeller w/Mica Teflon Bushings (Polypropylene) – Option
12 0156-0002-1000 | 1 | Rear Housing (Natural Kynar)
13 0156-0009-0100 | 1 | Drive Magnet
14 0156-0073-0010 | 1 | Motor Bracket (Aluminum)
15 0156-0053-1000 | 8 | 1/4"-20 Hex Nut (Stainless Steel)
16 0155-0017-1000 | 4 | 3/8"-16 x 1" Lg. Screw (Stainless Steel)
17 0155-0019-1000 | 4 | 3/8" ID x 5/8" OD Washer (Stainless Steel)
18 0156-0041-1000 | 1 | Motor Bracket (Plastic) – Option
19 0156-0022-1000 | 1 | 1 Phase Motor, TEFC, 2 HP, 115/230 V, 50/60 Hz
W 0156-0031-0100 | 1 | Wet End Kit (Items: 1, 2, 3, 5, 8, 9, 10, 12)
Materials in Contact With Solution:
Natural Kynar (PVDF), Ceramic, Viton, Carbon
LIMITED WARRANTY: March pumps are guaranteed only against defects in workmanship or materials for a period of one year from date of manufacture pumping water. For the complete
warranty and to register online go to www.marchpump.com/warranty-registration
NOTE: Contact Factory for other materials and/or parts not listed.
TE-7.5K-MD
Explosion proof and special voltage motors are available upon special order.
REPAIR PARTS LIST
#
1 0153-0011-1000 | 8 | 1/4"-20 x 1-1/2" Lg. Screw (Stainless Steel)
2 0157-0023-1000 | 8 | 1/4" ID x 5/8" OD Washer (Stainless Steel)
3 0156-0060-1000 | 1 | Front Housing (Polypropylene)
4 0156-0068-0100 | 1 | Front Housing with Flanges (Polypropylene)
5 0156-0010-1000 | 1 | 0.157" CS x 6.457" ID "O" Ring (Viton)
7 0156-0034-1000 | 1 | 0.157" CS x 6.457" ID "O" Ring (EPDM) – Option
8 0156-0016-1000 | 2 | Front & Rear Thrust Washer (Ceramic)
9 0156-0007-1000 | 1 | 4.500" Lg. Shaft (Ceramic)
10 0156-0064-0200 | 1 | Impeller w/Carbon Bushing (Polypropylene)
12 0156-0061-1000 | 1 | Rear Housing (Polypropylene)
13 0156-0009-0100 | 1 | Drive Magnet
14 0156-0073-0010 | 1 | Motor Bracket (Aluminum)
15 0156-0053-1000 | 8 | 1/4"-20 Hex Nut (Stainless Steel)
16 0155-0017-1000 | 4 | 3/8"-16 x 1 Lg. Screw (Stainless Steel)
17 0155-0019-1000 | 4 | 3/8" ID x 5/8" OD Washer (Stainless Steel)
18 0156-0041-1000 | 1 | Motor Bracket (Plastic) – Option
19 0156-0022-1000 | 1 | 1 Phase Motor, TEFC, 2 HP, 115/230 V, 50/60 Hz
W 0156-0066-0100 | 1 | Wet End Kit (Items: 1, 2, 3, 5, 8, 9, 10, 12)
TE-7.5P-MD
Materials in Contact With Solution:
Polypropylene, Ceramic, Viton, Carbon
0156-0015-1300
Advertisement
