Table Of Contents - LG FA164DAB Manual

FA164DAB-M0P_DGBRLL_ENG 9/21/09
Contents
Setting up
Main Unit
Remote control
Listening to CDs
Listening to the radio
Listening to the DAB radio
Listening to music from your portable player
Playing the iPod
Using an USB device
Setting the Clock
Recording to USB
Troubleshooting
Specifications
1:59 PM Page 3
POWER: This unit operates on a mains supply of 200-240V~, 50/60Hz.
WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains plug, fused at 5 amp.
When replacing the fuse always use a 5 amp BS 1362, BSI or ASTA approved type. Never use
this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer. If
the type of plug supplied is not suitable for the mains sockets in your home, then the plug should
be removed and a suitable type fitted. Please refer to the wiring instructions below:
WARNING: A mains plug removed from the mains lead of this unit must be destroyed. A mains
plug with bared wires is hazardous if inserted in a mains socket.
Do not connect either wire to the earth pin, marked with the letter E or with the earth symbol
or coloured green or green and yellow. If any other plug is fitted, use a 5 amp fuse, either in the
4
plug, or at the distribution board.
5
IMPORTANT: The wires in this mains lead are coloured in accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the mains lead of this unit
6
may not correspond with the coloured marking identifying the terminals in your plug, proceed as
follows: The wire which is coloured blue must be connected to the terminal which is marked with
the letter N or coloured black. The wire which is coloured brown must be connected to the
7
terminal which is marked with the letter L or coloured red.
8
9
Precautions in using the touch buttons
9
• Use the touch buttons with clean and dry hands.
10
11
• Do not press the touch buttons hard to make it work.
11
12
• Touch the button that you want to work in order to operate the function
13
13
• Be careful not to have any conductive material such as metallic object
- In a humid environment, wipe out any moisture on the touch buttons
before using.
- If you apply too much strength, it can damage the sensor of the
touch buttons.
correctly.
on the touch buttons, and it can cause malfunctions.
3