Table of Contents
Advertisement
Aligning the service names
Press SCAN/SORT on the remote control to display the sorting mode of DAB
broadcastings. Then, press the button once again to change the mode.
Default sort : The service names are aligned in a scanning order.
Name sort : The service names are aligned in an alphabetical order.
DAB scan
Press SCAN on the remote control for longer than 3 seconds, all of the DAB
bands are scanned. Then press it again, scanning will be canceled.
Selecting among Primary and Secondary broadcastings
For the frequency on which secondary broadcasting channels exist, B B blinks
after selection. Then, press B B / [] to select the secondary broadcasting.
Delete all of the saved DAB stations
Press and hold PROGRAM/MEMO on the remote control for 2 seconds.
"ERASE ALL" will be displayed. Press PROGRAM/MEMO to erase all the saved
stations.
Listening to music from your portable
player
The player can be used to play the music from many types of portable
player.
1. Connect the portable player by
plugging the unit into PORTABLE
IN on the front of the player:
2. Turn the power on:
3. Select the PORTABLE function:
4. Turn the portable player on and
start it playing:
The advantage of connecting your portable USB player through the
system's USB port is that the portable device can be controlled from the
system.
1. Connect the portable player to the
2. Select the USB function: The dis-
3. Select the folder :
4. Start the USB playing:
5. To stop a USB playing:
6. Before disconnecting the portable
7. Remove the USB player:
NOTES :
• Some portable devices are not compatible with this system.
ON PLAYER
ON REMOTE
• When various cards are connected to the Memory Card Reader, the first
detected card is recognized.
• Do not extract the USB device in operating.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device might not be
1 1
1 1
recognized.
FUNC.
INPUT
• A device using NTFS file system is not supported (Only the FAT (16/32) file
system is supported.).
• The USB function of this unit does not support all USB devices.
• Digital camera and mobile phones are not supported.
• This unit is not supported when the total number of files is 1000 or more.
Playing music using USB
system using a USB cable (not
supplied):
play will show READ, followed by the
number of files displayed.
USB player, change to any other
function by pressing:
ON PLAYER
ON REMOTE
FUNC.
INPUT
FOLDER•PRESET
B B / []
B B / []
x x
x x
FUNC.
FUNCTION
or
INPUT
9
Hide quick links:
Advertisement
Table of Contents
