Page 2
Get to Know Your Freemie Automatic Tubing Customizable Shuto Timer Connection Port Memory Buttons Power On / O Battery Life Indicator Easy Pour Spout Quick Release Tabs Adjustable Timer 40:00 100% 5 10 Suction Cycle Rechargeable USB-C Port 5 Ounce (148mL)
Page 3
• To avoid damage or malfunction DO NOT use abrasives, brushes, Note: See digital User Manual for UV or steam sterilization on any Freemie Cup parts. complete use and care instructions. • Assemble dry parts just before use, and leave parts disassembled in between use.
Page 4
Add SlimFit Fitmie Inserts SlimFit Fitmie Push Insert down until it is seated flat against Flange. SlimFit5 Cups come with 2 sets of Inserts to add to the 30mm hard Breast Flange. Size down with the 25mm or 28mm purple SlimFit Fitmie Inserts.
Ready to Pump Place Cups in your bra: Tubing and pour spout should be Bra fit is critical for proper use. Enough pressure is needed upright at the 12 o' c lock position. to seal the Flange against the breast while too much pressure may cause low output.
Page 6
Pumping Positions A range of pumping positions are possible with Freemie. Mind the pour spout! Good Pumping Positions Advanced Technique: Requires re-orientation of cups inside bra. Poor Pumping Positions Freedom of movement with Freemie depends on: • How Cups are oriented on your breasts •...
Page 7
SlimFit Fitmie sizes (15mm - 28mm) Dime: 17.91 mm Quarter: 24.26 mm Half Dollar: 30.61 mm available at www.freemie.com. Flange is too small Flange is too big Flange is correct size for the nipple to move freely in allowing too much breast and With properly fitted Flanges...
Page 8
Pump Anytime, Anywhere Breast Pump System with SlimFit5 Cups Spare parts and additional Freemie SlimFit Fitmie sizing inserts available at www.freemie.com Scan code to read User Manual. P236(A) Visit www.freemie.com...
Need help?
Do you have a question about the ROSE and is the answer not in the manual?
Questions and answers