Table of Contents
Advertisement
Adjusting the cutting depth
1.
Remove the battery pack.
2.
Hold the saw firmly and loosen the depth adjustment knob (15) by turning it
counter-clockwise.
3.
Move the base plate to obtain the desired depth of cut.
4.
Tighten the depth adjustment knob securely by turning is clockwise before
operating the saw.
Adjusting the cutting angle
1.
Remove the battery pack.
2.
Loosen the bevel adjustment knob (12) by turning it counter-clockwise.
3.
Adjust the bevel to set the cutting angle in the range of 0° to 50°, with the angle
scale showing the current angle set in degrees.
4.
Tighten the bevel adjustment knob securely by turning clockwise.
Advertisement
Table of Contents
