Brother PJ-722 Product Safety Manual page 9

DO NOT wind the AC adapter or Car adapter cable around the adapter or bend the cable, otherwise
the cable may be damaged.
DO NOT overload electric sockets or plug multiple devices into the same electrical socket. There is
a risk of fire, electric shock, and damage.
DO NOT use damaged plugs or bent electric sockets. There is a risk of fire, electric shock, and
damage.
Printer
Keep out of the reach of children, particularly infants, otherwise an injury may occur.
Stop operating the printer if it leaks or becomes discoloured, deformed, or otherwise defective.
Do not operate the printer while holding only the release cover. There is a risk of injury if the cover
detaches and the printer falls.
When connecting cables and accessories, make sure they are connected correctly and in the
correct order. Connect only the items that are designed specifically for this printer. There is a risk
of fire or injury. Refer to the instructions when connecting.
AC adapter/Car adapter (Optional)
Make sure that the AC adapter's power cord or the Car adapter is accessible so that it can be
removed in an emergency. DO NOT place objects on or near the AC adapter's power cord or the
Car adapter's cord.
Printer
 DO NOT remove the labels affixed to the printer. These labels provide operational information and
indicate the printer's model number.
 DO NOT push the power switch with an object that has a sharp point, such as a pen. This could damage
the switch or LED.
 DO NOT transport the printer while cables are connected to the AC/DC connector or USB port.
The connector and ports could be damaged.
 DO NOT store the printer in an area exposed to high temperatures, high humidity, direct sunlight,
or dust. These could cause discolouration or malfunction.
8
WARNING
CAUTION
IMPORTANT