Important Safety Instructions - Brother PJ-722 Product Safety Manual

Important safety instructions

Rechargeable Li-ion battery (Optional)
Carefully observe the following precautions for the rechargeable Li-ion battery (hereafter referred
to as "rechargeable battery"). If these precautions are not followed, overheating, leaking, or cracks
in the battery may result in an electrical short, explosion, smoke, fire, electric shock, injury to
yourself or others, or damage to the product or other property.
 Use the rechargeable battery only for its intended purpose. The printer and rechargeable battery
are designed to be used together exclusively. DO NOT insert the rechargeable battery into a
different printer, or a different rechargeable battery into your printer, otherwise a fire or damage
may occur.
 To charge the rechargeable battery, insert it into the printer, and then use the AC adapter
designed specifically for this printer.
 DO NOT charge the rechargeable battery near a fire or in direct sunlight. This could activate the
protection circuitry, which is designed to prevent danger from high heat. Activation of the
protection circuitry could cause charging to stop, charging to occur with excessive current/
voltage if the protection circuitry fails, or an abnormal chemical reaction within the battery.
 When charging the rechargeable battery, use only the battery charger designed specifically for
your rechargeable battery.
 DO NOT allow wires or other metal objects to come into contact with the terminals of the
rechargeable battery. DO NOT carry or store the rechargeable battery with metal objects, such
as necklaces or hairpins. This could cause an electrical short, and metal objects such as wires,
necklaces, or hairpins to overheat.
 DO NOT use or leave the rechargeable battery near fire, heaters, or other high-temperature
(above 80°C) locations.
 DO NOT allow the rechargeable battery to come into contact with or to be immersed in water.
 DO NOT use the rechargeable battery in corrosive environments, such as areas where salty air,
salt water, acids, alkalis, corrosive gases, chemicals, or any corrosive liquid is present.
 DO NOT use the rechargeable battery if it is damaged or leaking.
 DO NOT directly solder any connections to the rechargeable battery. This could cause internal
insulation to melt, gas to be emitted, or safety mechanisms to fail.
 DO NOT use the rechargeable battery with the polarity (+) (-) reversed. Check the orientation of
the rechargeable battery before inserting it, and do not try to force the rechargeable battery into
the printer. Charging the rechargeable battery with the polarity reversed could cause an
abnormal chemical reaction within the rechargeable battery or abnormal current flow during
discharge.
 DO NOT directly connect the rechargeable battery to a household electrical supply.
DANGER
3