Battery Removal And Installation - VTech Peppa Pig Learn & Explore Tablet Parents' Manual

INSTRUCTIONS
BATT ERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the unit.
Use a coin or screwdriver to loosen the screw.
3. If used batteries are present, remove these
batteries from the unit by pulling up on one
end of each battery.
4. Install 2 new ' AA ' (AM-3/LR6) batteries
following the diagram inside the battery box.
(For best performance, alkaline batteries or
fully charged Ni-MH rechargeable batteries
are recommended).
5. Replace the battery cover and tighten the screw to secure.
WARNING
Adult assembly required for battery installation.
Keep batteries out of reach of children.
4