panthera BRAKE BAMBINO 3 Assembly Instructions

NOTE! Before adjusting the brake, make sure that the tires are inflated inflated to 8 bar.
1) Mount the brake on the chassis using a 5 mm
Allen key and tighten the screw (1). Do not fully
tighten the screw to a start.
3) Slide the brake along the tube until the blade (3)
touch the tire.
Panthera AB, Gunnebogatan 26, SE-163 53 Spånga, Sweden, +46-8-761 50 40, www.panthera.se
ASSEMBLY INSTRUCTIONS
BRAKE BAMBINO 3
Assembly instructions for:
Brake Bambino 3
art.nr. 4630201, 4630202, 4630301, 4630302, 4630300
Tools aquired:
Allen key 5 mm
1
2) Put the brake in the activated position by moving the brake lever (2)
forward.
3
4) Check that the bracket (4) is perpendicular to the seat.
Sid 1
4
Art.nr 8822134.
Rev.2020-01