resideo PROSIXLCDKP-EU Series Installation And Setup Manual

The PROSIXLCDKP-EU is a wireless keypad for use with Control Panels that support SiX™ series devices. Up to eight (8) Keypads
can be used on the system.
Note: Installation shall be done in accordance with local regulations.
Item/Key
Display Window Liquid Crystal Display (LCD) displays
protection point identification, system status,
and messages.
Power LED
System Status LED
System Trouble LED
AWAY Arm Away key
HOME Arm Home (Stay) key
NIGHT Arm Night (Stay) key
OFF OFF key
SELECT Select key
 Scroll key
SCROLL

Arm Maximum key (No Delay)
MAX
TEST System Test key
BYPASS Bypass Zone key
Arm Instant key (No Delay)
INSTANT
CODE Add Security Codes key
CHIME Chime Mode key
READY Check Zones key
# Quick Arm key
Disarm/Cancel Key
Panic Alarm key
Fire Panic key
Police Panic key
Medical Panic key
Keys 0 - 9 Numeric keys used to enter security code(s).
Prox Tag reader (RFID)
KEYPAD OPERATION
For operating instructions, refer to the Control Panel instructions.
LEDs
POWER
STATUS Not Ready to Arm
TROUBLE No Trouble Present
Note: When the system is in Programming Mode, the Trouble and Status LEDs alternately flash Red and Green.
Installation and Setup Guide
Function
Local Programming key (2-second hold)
Off
Armed
System Trouble Present
PROSIXLCDKP-EU SERIES
Red - Steady Green - Steady
Battery - OK
Ready to Arm
Wireless Keypad
Red - Flashing
Battery - Low
Alarm Detected
-- Device Trouble Present