Setting - Acer H6800 User Manual

19
3D 3D Mode
Choose "On" to enable DLP 3D function.
•
•
3D L/R Invert
If you see a discrete or overlapping image while wearing DLP 3D
glasses, you may need to execute "On" to get best match of left/right
image sequence to get the correct image (for DLP 3D).
Note 1: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under HDMI or Video mode.
Note 2: "HDMI Color Range" and "HDMI Scan Info" functions are only
supported under HDMI mode.
Note 3: Functions vary depending on model definition.
Note 4: 3D function is only supported for 120Hz.

Setting

Source Selection Manual by source menu, Auto by Smart Detection.
HDMI CEC Default is "Off". Choose "On" to enable HDMI CEC function.
Information Display the projector information for Model Name, Input Source,
Signal Type, Display Mode, Serial No., Software Version and QR
code on the screen.
Scan QR code linking to Acer projector portal via mobile.
Reset Reset OSD: Press the "ENTER" button and choose "Yes" to return
the parameters on all menus to the factory default settings.
Reset SMART: Press the "ENTER" button and choose "Yes" to reset
SMART source.
Note: Functions vary depending on model definition.
On: Choose this item while using DLP 3D glasses, 120Hz 3D
capable graphics cards and HQFS format file or DVD with
corresponding SW player.
Off: Turn off 3D mode.