Table of Contents
Advertisement
TROUBLESHOOTING
Problem
Tool will not start.
Battery pack will
not charge
Possible Causes
•
Battery pack not
installed properly.
•
Battery pack not
charged.
•
Battery pack not
inserted into
charger.
•
Charger not
plugged in.
•
Surrounding air
temperature not
suitable.
•
Battery pack too
hot or too cold.
Likely Solutions
•
Check battery pack installation.
•
Check battery pack charging
requirements.
•
Insert battery pack into charger until
red LED appears.
•
Plug charger into a working outlet.
Refer to "Charging the battery pack"
for more details.
•
Check current at receptacle by
plugging in a lamp or other
appliance.
•
Check to see if the receptacle is
connected to a light switch which
turns the power off when you turn
out the lights.
•
Move charger and battery to a
surrounding air temperature of
above 4.5°C or below 40.5°C.
•
The charger will not charge a
battery pack if the cell temperature
is below approximately 0°C or above
60°C.
•
The battery pack should be left in
the charger and the charger will
begin to charge automatically when
the cell temperature warms up or
cools down.
Advertisement
Table of Contents
