Table of Contents
Advertisement
CARE & MAINTENANCE
To prevent serious injury or death from accidental operation, turn the Power Switch of the tool
to its "Off" position and disconnect battery pack from tool before performing any inspection,
maintenance, or cleaning procedures.
•
Clean out dust and debris from vents and electrical contacts by blowing with
compressed air. Always wear safety goggles when cleaning tools with compressed
air.
•
Keep tool handles clean, dry, and free of oil or grease.
•
Use only mild soap and a damp cloth to clean the tool, keeping away from all
electrical contacts.
Note
Certain cleaning agents and solvents are harmful to plastics and other insulated parts.
Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household detergents containing ammonia.
Tool maintenance must only be performed by qualified repair personnel. If the tool is not
working properly, do not attempt to repair it yourself. Contact the Kogan customer support
team.
SPECIFICATIONS
Rated Voltage
No load speed
Blade stroke
Blade change
Battery pack
Charging time
Charger adapter
20V
0 – 2800/min
7/8 inch (22mm)
Toolless
20V 2000mAh Li-ion
~1 hour
Input: 100-240V 50-60Hz
Output: 21V 2A
Advertisement
Table of Contents
