Flow Of Copying Image Files To A Computer - Hitachi I.mega HDC-401EX User Manual

■ Flow of Copying Image Files to a Computer
1
1
Check the operating environment of the computer.
Windows Me/2000/XP
3
3
Connect the HDC-401EX to the computer usingthe USB cable .
※When your HDC-401EX is connected to the computer for the first time,
the New Software wizard is displayed. It will quickly navigate you through
the necessary steps so that the computer can automatically recognize
the HDC-401EX.
4 Open My Computer and click the removable disk (= camera).
4
Copy the desired image files to the computer .
5
5
Disconnect the camera .
77
Windows 98/98SE
2
Install the HDC-401EX Driver
2
in the computer . P79
P83
P85
1
1
Check the operating environment of the computer
The computer must satisfy the following conditions before you can connect your
HDC-401EX to the computer using the USB cable (for the loading of captured
images, etc.). Check to see if the computer meets these requirements before
connecting the camera.
■ OS: Microsoft Windows 98/98SE/Me/2000/XP
■ Preinstalled with a USB interface (Ver. 1.1)
■ Preconfigured with a CD-ROM drive
The OS must be preinstalled. Proper operation cannot be guaranteed on a
●
custom computer or in an upgraded OS, even if it is one of the systems
specified above.
The correct operation cannot be guaranteed if the HDC-401EX is connected
●
via a USB hub or extended USB board.
You may not be able to operate the HDC-401EX correctly on the computer,
●
depending on the peripheral configuration.
P81
Windows 98/98SE
2 2
→Proceed to , Installing the HDC-401EX Driver in the Computer
Windows Me/2000/XP
3
3
→Proceed to , Connecting the HDC-401EX to the Computer Using
the USB Cable P81 .
P79
.
78