Advertisement
OVERVIEW
On/Off Button
1
(Multifunctional)
2
Charging Indicator Lights
3
LED Flashlight
4
USB Output Port 1 (QC 3.0)
5
USB Output Port 2 (QC 3.0) Charge QC 3.0 compatible devices.
USB C Input/Output
6
(PD30W)
7
Micro USB Input Port
8
Jump Starting Port
9
Black Clamp
10 Red Clamp
11
Plug
Battery Clamp Indicator
12
Lights
13 Force Start Button
Press the button to charge your devices.
Press the button to see the remaining capacity.
Long press the button to turn the flashlight on or off.
Shows the charging progress: 25%, 50%, 75% and 100%.
Flashlight modes: Solid, SOS, Flash and Off
Charge QC 3.0 compatible devices.
Charge the jump starter via USB-A to USB-C cable.
Charge PD30W compatible devices via USB C to USB
C cable.
Charge the jump starter via the Micro USB cable.
Insert the plug into the jump-starting port.
Connect the black clamp to the negative terminal of
the car battery.
Connect the red clamp to the positive terminal of the
car battery.
To be inserted into the jump-starting port for use.
Show the status of the smart battery clamp.
Press this button if the car battery voltage is too low.
Advertisement
