SAFETY & WARNINGS • Use only the included battery clamp to start the car. • Do not use this unit if any part of the cable, clamp or cord is damaged. • Never connect both clamps together when the product is turned ON. •...
Page 4
OVERVIEW Press the button to charge your devices. On/Off Button Press the button to see the remaining capacity. (Multifunctional) Long press the button to turn the flashlight on or off. Charging Indicator Lights Shows the charging progress: 25%, 50%, 75% and 100%. LED Flashlight Flashlight modes: Solid, SOS, Flash and Off USB Output Port 1 (QC 3.0)
OPERATION Charging the product Connect the jump starter and the power source via the USB C cable or Micro USB cable. Short press the on/off button to turn on the product. While charging the jump starter, the battery level indicator light will flash. Once it is fully charged, all 4 battery level indicator lights will be on.
Page 6
Jump start your car Note: • This product is for 12V car (all petrol or up to 6.0L diesel engines) only. • Ensure that 3 to 4 indicator lights are illuminated (battery level is above 50%) before you use it to jump-start your car. Step 1: Insert the plug of the smart battery clamp completely into the jump starter.
Page 7
Step 2: Connect the red clamp to the positive terminal (+) of the car battery and connect the black clamp to the negative terminal (-) of the car battery. If the green and red-light indicators on the battery clamp are flashing alternately, you are safe to move on to the next step.
Page 8
Step 3-b (optional): Force starts function. • Make sure that the clamps are connected to the correct polarity battery terminal. • Hold the force start button for 3 seconds to enable the force start function. • When the indicator light of the smart clamp is solid green, the vehicle will need to be started within 30s.
CARE & MAINTENANCE • Never use the product to start a bulging or damaged car battery. • Store the product in a shaded, well-ventilated area. • Handle the product with care. Avoid dropping or striking the product heavily and repeatedly. •...
SPECIFICATIONS Capacity 16000mAh Micro USB input 5V/2.1A PD30W: 5V/3A, 9V/3A,12V/2.5A, 20V/1.5A Type C input & output QC18W: 5V/3A, 9V/2A, 12V/1.5A USB outputs 5V/3A, 9V/2A, 12V/1.5A Jump-start current 600A (last for 1s) Peak current 1200A (last for 0.2s) ≦13v±0.3v Short circuit protection Effective Over-discharge protection Overheating protection...
Page 11
Q: How is the product turned off? A: This product will power off automatically when no load is detected or when charging is complete. Q: How long does it take to fully charge the jump starter? A: Approximately 3-9 hours through the Micro USB input port or USB C input port. Q: How many times can this product start a vehicle at full capacity? A: Approximately 20 times.
Page 12
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...