General Measure GMT-H1 Operating Instruction page 6

St a t u s in d i c a t o r :
POWER: indicates the POWER indicator.
STABLE: indicates the stability indicator.
When the weighing
platform or hopper material weight change in the stable range, the indicator
light.
COMx: communication indicator light;
GPRS: GPRS communication indicator light;
Ke y b o a r d :
: Clear/Exit key to exit the current operation/return to
the previous menu key.
Long press to clear (meet the conditions for
clearing)
: Parameter selection key. During data input, when the
main display blinks, press this key to increase the blinking bit by
1. When the blinking position is 9, press this key to increase the
blinking bit by 1.
: Parameter setting function selection key. During data
input operation, the main blinking bit blinks. Press this key to
move the blinking bit to the right.
: Confirm button, confirm to enter the current option
during calibration or parameter setting;
The data entry operation
confirms the data and terminates the operation.
Main interface switch button: Power on The default display is the
incoming and outgoing material content, press It can switch to
display the accumulative content of material in and out on the same day.
3