TROUBLESHOOTING
Problem
Tool will not start
Battery pack will not
charge
Possible Causes
•
Battery pack not
installed properly.
•
Battery pack not
charged.
•
Battery pack not
inserted into charger.
•
Charger not plugged
in.
•
Surrounding air
temperature not
suitable.
•
Battery pack too hot
or too cold.
Likely Solutions
•
Check battery pack installation.
•
Check battery pack charging
requirements.
•
Insert battery pack into charger
until red LED appears.
•
Plug charger into a working outlet.
Refer to "Charging the battery
pack" for more details.
•
Check current at receptacle by
plugging in a lamp or other
appliance.
•
Check to see if the receptacle is
connected to a light switch which
turns the power off when you turn
out the lights.
•
Move charger and battery to a
surrounding air temperature of
above 4.5°C or below 40.5°C.
•
The charger will not charge a
battery pack if the cell
temperature is below
approximately 0°C or above 60°C.
•
The battery pack should be left in
the charger and the charger will
begin to charge automatically
when the cell temperature warms
up or cools down.