Kogan CERTA CT20VIMPWRB User Manual

Powerplus 20v cordless impact driver (skin only)

Advertisement

Quick Links

POWERPLUS 20V CORDLESS
IMPACT DRIVER (SKIN ONLY)
CT20VIMPWRB

Advertisement

Table of Contents
loading

Summary of Contents for Kogan CERTA CT20VIMPWRB

  • Page 1 POWERPLUS 20V CORDLESS IMPACT DRIVER (SKIN ONLY) CT20VIMPWRB...
  • Page 3: Safety And Warnings

    SAFETY & WARNINGS Save all warnings and instructions for future reference. The term “power tool” refers to your mains operated (corded) power tool or battery-operated (cordless) power tool. Work area • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
  • Page 4 Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control. Use only accessories that are recommended by Kogan.com for your model. Accessories that may be suitable for one tool may become hazardous when used...
  • Page 5 Recharge only with the charger specified by Kogan.com. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
  • Page 6 Safety instructions for battery charger • Before using battery or charger, read all instructions and cautionary markings on the battery charger, battery pack and product using the battery. • Use only the charger which accompanied your product or direct replacement. Do not substitute any other charger.
  • Page 7 Safety instructions for the battery pack • Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when lithium-ion battery packs are burned. •...
  • Page 8 OVERVIEW Tool Holder Rotational Direction Switch On/Off Switch Handle Battery Pack (Not Included) Battery Charger (Not Included) Push Lock Button Intended use This tool is intended for driving in and loosening screws as well as for drilling into wood, metal, ceramic and plastic. Even when a tool is used as intended, it is not possible to eliminate all residual risk factors.
  • Page 9: Operation

    OPERATION Changing the tool Before performing any work on the power tool (e.g., maintenance, tool change, etc.) as well as during transport and storage, set the rotational direction switch to the centre position. Unintentional actuation of the On/Off switch can lead to injuries. Inserting the battery (not included) Use only original Certa Li-ion batteries that match the voltage listed on the nameplate of your power tool.
  • Page 10 Usage advice Apply the power tool to the screw/nut only when it is switched off. Rotating tool inserts can slip off the workpiece if applied when in motion. The maximum torque is achieved after the impact duration of 6–10 seconds. After this duration, the tightening torque is increased only minimally.
  • Page 11 Whether there is proper contact at the charging contacts on the charger If the battery continues to fail to charge, please contact the Kogan customer support team. To ensure that the battery pack provides long service you should take care to recharge it as soon as you notice that the power of the power tool drops.
  • Page 12 Symbols The following symbols or initials may be used on the tool. Please see below to learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. Symbol Name Designation/explanation Volts Voltage Amperes Current Hertz Frequency (cycles per second)
  • Page 13: Care And Maintenance

    Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Tool maintenance must only be performed by qualified repair personnel. If the tool is not working properly, do not attempt to repair it yourself. Contact the Kogan customer support team. SPECIFICATIONS...
  • Page 14: Troubleshooting

    TROUBLESHOOTING Problem Possible Causes Likely Solutions • Battery pack not • Check battery pack installation. installed properly. Tool will not start • Check battery pack charging • Battery pack not requirements. charged. • Insert battery pack into charger until red LED appears. •...
  • Page 15 NOTES...
  • Page 16 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...

Table of Contents