Advertisement
4
Vane Installation
Push the vanes up into the carrier stem. Then pull slightly straight down to lock
into place. For wand options, if the louvers are curved the curved side should
face the wand.
5
Test Vane Rotation
Wand Control: Turn the wand in
the direction you want the vanes
to rotate.
6
Test Traverse
Wand Control: Rotate the vanes
to the open position, then push or
pull the wand to open (stack vanes)
or close (unstack vanes).
!
7
Valance Installation
Snap the plastic valance clips onto the aluminum headrail. Then slide the
top of the valance into the plastic valance clips until they lock into place.
8
Valance Returns
HOME DECOR standard valances have rounded corners and come preassembled.
However, if optional square valance is chosen, and the valance
returns are not preassembled, slide the clear plastic corner clip on to
the top edge of the valance. Then slide the valance return into the
other side of the corner clip as shown to the right.
Valance returns may be trimmed to fit using heavy duty scissors.
Revision 110420
Made in America
WARNING: Do not traverse the blind with the vanes in the closed position.
2612 West Townley Ave, Suite 5, Phoenix, AZ 85021
Phone: 602-995-9659 Fax: 602-995-7157
Chain Control: Pull the chain
once in each direction, rotating
the vanes open and closed.
Chain Control: Pull the cord to
ensure the blind traverses
smoothly in both directions.
VOM-2
Advertisement
