Always apply the brake whenever the stroller is stationary. • The maximum weight capacity is 15kg. • Do not use any accessory not supplied and recommended by Kogan.com. Ensure the stroller is assembled correctly as per the instructions below before use.
Page 4
OVERVIEW Handle Cup holder Canopy Storage basket Footboard Front wheel Rear wheel...
Page 5
ASSEMBLY Release the red locking latch, unfold the stroller upwards and ensure sure both locks snap into place. Attach the front wheels by pushing them up onto the shaft with the nut facing upward. To detach the front wheels, pull them down while pressing down on both nuts.
Page 6
Thread a washer, the brake, another washer, and the wheel onto the axle (as shown in Figure 3-1 below). Attach another washer, insert the clip into the hole of the wheel and attach the covering cap. Attach the rear wheels on the rear legs, listening for the “click” to ensure secure fastening.
Page 7
Attaching the cup holder Affix one side of the cup holder to the tube, then the other side. The edge of the cup holder is elastic and will stretch accordingly. Functions Step down on the brake to stop the stroller. Slip down the red nut to unlock the front wheels, which can then be rotated 360°.
Page 8
Open and fold the canopy as shown in the image below. Secure the two safety leashes to the pet’s collar when placed in the stroller. Folding Unzip the canopy window, then press in the fastening latch as shown to fold the stroller and fasten the folding hook.
Page 12
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...